Squirrel Monkey Ninja

Something besides trucks! This was a quick render for practice. I love squirrel monkeys, and I wondered how a ninja squirrel monkey would like like. This was not a serious sketch, so I did not spend too much time on it...

BMW Conceptikus

This was done back in February 2014, I forgot to upload it. The design is not great, but the render was a good practice, and it helped when I rendered the latest Silverado K35 design for my project. BMW purists may hate this design, because there were a few things I did differently, such as the triple slash logo for the M performance label being warped into a slim horizontal line seen on the lower vehicle.

Chevrolet K35 Design Update

This is just a quick update to show a tweaked design for the K35, detailed in the previous post. This updated design showcases a more balanced overall look with some tweaks on the bumper and the lower body panels on the side. The A-pillars are also angled inward to decrease blindspots and aid in aerodynamics. I have to figure out how to design a complete overhead lamp setup; currently there are only the two side lights but not the middle lights. For those who are not aware, those roof lights are government required to indicate that these trucks are above a certain gross weight rating and exceeding width limits as well. All commercial trucks and tractor trucks have them. On concept designs, they are not required, but because they are a visual statement on dually trucks, I wish to focus on them as part of the design.

The design is still in need of some tweaks here and there, and the rear end is needing some thought as well. Other than that, this design is nearly final. The adaptable bumper design is another thing left to do, but that will be a part of the "special variant" that I plan on doing for each of the trucks in the design project.

Like all of my digital renders, this one is sketched by pencil first and then colored in Adobe Photoshop. In the future, I may rely completely on Photoshop to do these renders. My scanner is getting old and I will have no way of transferring my pencil sketches in the future (I need to watch my wallet right now!).

Chevrolet Silverado K35 - A look back and a look forward...

I may or may not have mentioned it, but the Chevrolet Silverado K35 was the first vehicle for my project when it began. It has gone through many design changes, and I feel I have come a very long way since it all started.Creating a proper design and body configuration was difficult due to the fact that heavy-duty trucks are not usually built to be design statements (they are work trucks after all). Before trying some different design styles, I had created some quick sketches of my former design ideas for the truck. Before I discuss the former designs, I wish to show the design change I have decided on.

This design is more fluid and aerodynamic up front. It has a look very similar to my Colorado SS concept (see previous post), and this could be a new family face for all of my Chevrolet truck designs. The body sculpting on this truck needs some work, especially the lower section and the rocker area. This design has more sculpted lines, and a more organic flow overall, but it is somewhat difficult to master for a heavy-duty pickup truck, in the sense that this design is not very adaptable for . One solution is an alternative front bumper design, which would feature a more adaptable design. The above design is too cumbersome for folks to work with if they desired an adaptable front bumper, especially for the purposes of bumper conversions, or bumper extensions for fire and rescue or snow plow vocations. Regardless, I am liking the new design and it is definitely a different direction for a heavy duty truck compared to what the industry usually likes to go for: big rig looks.

This image was already posted a few months ago. Looking back at it, I am glad I walked away from this design. Chevrolet design does not seem to work well with a big rig style; my amateur level of design skills may be to blame. Also, this truck looks too much like a product that may come from Ford or Ram. The cabin design was also a pain. My decision to go for invisible A and B pillars made it difficult to shape the cabin in a good way. I do not have any other renders to show what the cabin is supposed to look like, but I can only say that I am happy to have changed it altogether with the newest design shown in the first image.

Here we have the former designs. They are recently rendered based off of the old sketches that I had done when the project was in its infancy. My design and drawing skills have advanced monumentally since then, so these designs look far better than they did when I first drew them. I may have uploaded sketches showing these designs in a very early post in my blog. The above two renders show the design I was working on right when the project started, around the year 2009 - 2010. This design is very familiar and rather old-school. There are clearly separate bumpers front and rear, a boxy front end, and nothing spectacular. Well, there are the LED lights, the forward-tilt clamshell hood, and the strong body sculpting, but this design did not really break much revolutionary ground, and it looked a lot like something Ford may build, especially that front end.

This design is my answer to solve the problems with the first design. This design is more aggressive, and very different from what Ford and Ram usually does. This design also features round fenders and wheel-housing, something General Motors themselves are not too fond of! I also decided on round fenders on the final design. At the time, I was not too happy about this design because it just did not seem like the right design for a heavy-duty pickup truck, especially that radical front end design.

I went even more radical with this design, which is basically a tweaked version of the second design. Unlike the Camaro-like nature of the front end of the second design, this design is more like the new age semi trucks with their aerodynamic front ends. This design would work very, very well due to the massive grille opening for the largest radiators that can fit in this truck, and these trucks need all the cooling power they can get. The reason for why I did not choose this design is because it was TOO different from a traditional or familiar Chevrolet truck design...

I have already posted these in an earlier thread, but here they are again. This design was the closest to being final, until I did a double take on that front end. That front area looks too much like a minivan on steroids. It just was not working the way I wanted it too. The body sculpting was not too exciting either. The rear, however, is almost perfect. I am planning on transplanting the entire rear end design onto my latest design, but with a few minor tweaks.

More renders will follow for the latest design, with different body sculpting, and the alternate front bumper design. With the newer design, I may have a better idea of what the interior will look like as well.

Chevrolet Colorado SS Concept Renders

It has been a while. The design project is still ongoing. I have been busy working for my friend, creating renders for motorcycle concept design templates. Those will be uploaded when I receive permission to do so. Concerning the design project, I have changed plans with a few of the trucks. The project included a 7/8 pickup truck for both the Chevrolet and GMC brands, but the Chevrolet variant was somewhat troublesome. I had originally planned on a crew-cab short-bed model that would be well-suited for the suburban and rural demographic that uses trucks as their main mode of transportation, but uses the utilitarian aspects every now and then. Honestly, I found that to be a rather boring direction, and this project was purely conceptual after all. I decided on a high performance direction instead.

This is rendered from the initial sketch that started the idea. The truck has a stepside body style with running boards around the rear fenders. The front is very aggressive in its shaping and colors to emphasis the truck's performance edge. The body sculpting is lacking, though, especially at the doors. The red trim on the lower fascia up front may be a bit too much, too.

This render shows some experimenting with body sculpting. The top left corner shows the truck seen in the first image. The second one takes after the C1 Corvette, just somewhat. And the third one at the bottom is the one I wish to use.

This design is the Corvette-inspired version, though I decided against this one because that body sculpting does not fit really well with the rear bed piece.

This design may become the final one, but the front bumper fascia may change, most likely based off of the initial design seen in the first image. The wheels are of better quality, too. All three of the designs have a nice hugging rear cabin section where it seems to "hug" the bed together. The truck with have a very bright silver paintjob, almost pure white, but with enough of a metallic tint to it to make it look very steel-like.